Rail-to-Rail Comparator Circuit in FlexRay Communication
The Designed IP is the Rail-to-Rail Comparator in FlexRay communication. The designed IP consists of bias current circuit, Rail-to-Rail input and output buffer. Total bias current is 120uA and operation up to supply voltages of 3.3V. Since using the Rail-to-Rail input structure it can be raised to the drain voltage of ..
Comparator with hysteresis in the CAN communication
The Designed IP is the Comparator with hysteresis in CAN communication. The designed IP consists of bias current circuit, two-stage and folded-cascode amplifiers with a resistor and current steering circuit (hysteresis). The performance of hysteresis characteristic (threshold- voltage) is determined by resistor and hys..
22.5uW, Low-noise Two-stage Comparator with 100MHz clock
ADC converts analog signals to digital signals, and the demand for ADC has been increased. In order to conduct A/D conversions, comparator is necessary for deciding whether input analog signal is higher or lower than the quantize levels. Therefore, comparator is one of the key blocks affecting the ADC performances.
12bit 10MSPS SAR ADC with 8:1 Input Mux
SHM018C1210SAR8CH_r1 is 12-bit Successive-Approximation A/D converter. This cell is suitable to serve as an auxiliary ADC of a microprocessor. An analog multiplexer is added to enable the selection of a number of inputs.